Accessibility

PASSAGE designed the P113 profile with signage insert TBS suitable for all base materials whether for an inside or outside use. It enables setting in the contrast of the risers in the public buildings

PASSAGE designs and manufactures non-slip high-performance U24 (thickness : 5mm, width : 24mm) solutions tailored to decking, paletage wood in order to solve slipping issues and staris.

PASSAGE designed an aluminium profile P62 (thickness : 4mm, width : 62 mm) for non-slip strips for indoor or non-slip mineral grain for outdoor.

PASSAGE designed an aluminium profile P38 (thickness : 4mm, width : 38 mm) for non-slip strips for indoor or non-slip mineral grain for outdoor.

PASSAGE has designed P38 aluminium flat section for TBS non-slip adhesive tape x 25mm (thickness: 4mm, width: 38mm).

PASSAGE has designed P62 flat aluminium section for two TBS non-slip adhesive tapes x 20mm (thickness: 4mm, width: 62mm).

PASSAGE has designed the U24 aluminium insert with embedded hard mineral granules x 21mm width (thickness: 4mm, width: 24mm).

PASSAGE has designed L29 aluminium angle bar for TBS non-slip adhesive tape x 20mm width (thickness: 4mm, width: 52mm).

PASSAGE has designed L52 aluminium angle bar for TBS non-slip adhesive tape x 40mm (thickness: 4mm, width: 52mm).

PASSAGE has designed L29 aluminium angle bar with an embedded 20mm insert of hard mineral granules (thickness: 4mm, width: 29mm).

PASSAGE has designed L52 aluminium angle bar with embedded hard mineral granules x 40mm (thickness: 4mm, width: 52mm).

PASSAGE designs and manufactures non-slip U29 (thickness : 5mm, width : 29mm) high-performance solutions tailored to decking, paletage wood in order to solve slipping issues and staris.

PASSAGE has designed the U29 aluminium insert with embedded hard mineral granules x 26mm width (thickness: 4mm, width: 29mm).

PASSAGE designed an aluminium profile striped L45 for inside the building.

Stainless steel tactile indicators, and old black steel reproducing the hazard tactile warning strips (BEV), are designed to warn a danger and to secure the movements of blind and visually impaired in areas with obstacles.

PASSAGE designed the P100 flat, for setting in the contrast of the risers in the public/commercial buildings. This flat piece is suitable for all base materials whether for an inside or outside use.

This marking on the ground, both tactile and visual, guides along the chain of movement. 

Passage SAS has developed a P38 profile (thickness 4mm, width 38 mm) to meet the legal requirements on accessibility and floor markings. These guidance tactile strips are for use inside public and commercial buildings.

The Hazard Tactile Warning Strips (BEV) are designed to inform and secure the travels of blind and visually impaired in areas with obstacles.

The hazard tactile warning strips are designed to inform and secure the travels of blind and vision impaired pedestrians in areas with obstacles. They comply with the NF P98-351 of August 2010, and are for outside use only.

The hazard tactile warning strips (BEV) are designed to inform and secure the travels of blind and vision impaired pedestrians in areas with obstacles. They comply with the NF P98-351 of August 2010, and are for inside and outside use.